What is the difference between a blind rivet and a regular rivet?

Dec 03, 2025Leave a message

Rivets are fundamental fasteners used in a wide range of industries, from aerospace and automotive to construction and manufacturing. They play a crucial role in joining two or more materials together securely. Among the various types of rivets available, blind rivets and regular rivets stand out as popular choices, each with its own unique characteristics and applications. As a leading blind rivet supplier, I am often asked about the differences between these two types of rivets. In this blog post, I will delve into the details of blind rivets and regular rivets, highlighting their key differences, advantages, and applications.

What are Regular Rivets?

Regular rivets, also known as solid rivets, are one of the oldest and most traditional types of fasteners. They consist of a smooth, cylindrical shaft with a head on one end. To install a regular rivet, the rivet is inserted into a pre-drilled hole in the materials to be joined. The tail end of the rivet is then deformed using a rivet gun or a hammer, creating a second head that holds the materials together. This process is known as riveting.

Regular rivets are typically made of materials such as aluminum, steel, copper, or brass. They come in a variety of sizes and shapes, including round head, flat head, and countersunk head, to suit different applications. The strength of a regular rivet depends on the material it is made of, its size, and the quality of the installation.

What are Blind Rivets?

Blind rivets, also known as pop rivets, are a type of fastener that can be installed from one side of the material, making them ideal for applications where access to both sides of the joint is limited or impossible. They consist of a rivet body, a mandrel, and a head. The rivet body is inserted into a pre-drilled hole in the materials to be joined, and the mandrel is pulled through the body using a special tool called a rivet gun. As the mandrel is pulled, it expands the rivet body, creating a bulge on the opposite side of the hole and securing the materials together. Once the rivet is fully installed, the mandrel snaps off, leaving behind a clean and secure joint.

Blind rivets are available in a wide range of materials, including aluminum, steel, stainless steel, and copper. They also come in different types, such as Closed Core Rivet, Open Core-pulling Rivet, and Closed Blind Rivet, each designed for specific applications. The strength of a blind rivet depends on the material it is made of, its size, and the type of rivet.

Closed Blind RivetOpen Core-pulling Rivet

Key Differences between Blind Rivets and Regular Rivets

Installation

One of the most significant differences between blind rivets and regular rivets is the installation process. Regular rivets require access to both sides of the joint to install, as the tail end of the rivet needs to be deformed using a rivet gun or a hammer. This can be a time-consuming and labor-intensive process, especially in applications where access to the backside of the joint is limited or impossible.

On the other hand, blind rivets can be installed from one side of the material, making them much easier and faster to install. This is particularly useful in applications where the materials to be joined are too thick or too large to access from both sides, or where the joint is located in a hard-to-reach area.

Strength

The strength of a rivet is an important consideration in any application. Regular rivets are generally considered to be stronger than blind rivets because they create a solid, permanent joint. The deformation of the tail end of the rivet during installation creates a tight fit between the rivet and the materials being joined, which helps to distribute the load evenly and prevent the joint from coming apart.

Blind rivets, on the other hand, rely on the expansion of the rivet body to create a secure joint. While they can provide a strong and reliable connection, their strength is typically lower than that of regular rivets. However, the strength of a blind rivet can be increased by choosing the right type of rivet and ensuring proper installation.

Cost

Cost is another important factor to consider when choosing between blind rivets and regular rivets. Regular rivets are generally less expensive than blind rivets because they are simpler in design and require less specialized equipment to install. However, the cost of installation can be higher for regular rivets, especially in applications where access to both sides of the joint is difficult or time-consuming.

Blind rivets, on the other hand, are more expensive than regular rivets because they require a special tool to install. However, the cost of installation can be lower for blind rivets, especially in applications where the materials to be joined are large or difficult to access from both sides.

Applications

The choice between blind rivets and regular rivets depends on the specific application. Regular rivets are commonly used in applications where a strong, permanent joint is required, such as in the aerospace, automotive, and construction industries. They are also used in applications where the joint will be exposed to high levels of stress or vibration, such as in bridges, buildings, and machinery.

Blind rivets, on the other hand, are ideal for applications where access to both sides of the joint is limited or impossible, such as in electronics, appliances, and furniture. They are also used in applications where a quick and easy installation is required, such as in DIY projects and repairs.

Advantages of Blind Rivets

As a blind rivet supplier, I can attest to the many advantages of using blind rivets in various applications. Here are some of the key benefits of blind rivets:

  • Easy Installation: Blind rivets can be installed from one side of the material, making them much easier and faster to install than regular rivets. This can save time and labor costs, especially in large-scale projects.
  • Versatility: Blind rivets are available in a wide range of materials, sizes, and types, making them suitable for a variety of applications. They can be used to join different types of materials, including metal, plastic, and wood.
  • No Special Skills Required: Unlike regular rivets, which require a certain level of skill and experience to install correctly, blind rivets can be installed by anyone with a basic understanding of the installation process. This makes them a popular choice for DIY projects and repairs.
  • Clean and Secure Joints: Blind rivets create a clean and secure joint that is resistant to vibration and corrosion. They also leave behind a smooth, finished surface that is aesthetically pleasing.
  • Cost-Effective: While blind rivets are more expensive than regular rivets, the cost of installation can be lower, especially in applications where access to both sides of the joint is difficult or time-consuming. This makes them a cost-effective solution for many applications.

Conclusion

In conclusion, blind rivets and regular rivets are both important fasteners that have their own unique characteristics and applications. Regular rivets are ideal for applications where a strong, permanent joint is required, while blind rivets are better suited for applications where access to both sides of the joint is limited or impossible. As a blind rivet supplier, I understand the importance of choosing the right type of rivet for your specific application. If you have any questions or need help selecting the right blind rivets for your project, please do not hesitate to contact me. I would be happy to assist you in finding the best solution for your needs. Whether you are a professional contractor or a DIY enthusiast, I am confident that I can provide you with the high-quality blind rivets and excellent customer service that you deserve. Contact me today to discuss your requirements and start your next project with confidence.

References

  • ASM Handbook Committee. (2004). ASM Handbook, Volume 11: Failure Analysis and Prevention. ASM International.
  • Machinery's Handbook: A Reference Book for the Mechanical Engineer, Designer, Manufacturing Engineer, Draftsman, Toolmaker, and Machinist. (31st ed.). Industrial Press.
  • Rivet Manufacturers Association. (n.d.). Rivet Basics. Retrieved from [Website URL]