No welding, no tapping! Disassemble the working principle of rivet nut

Sep 15, 2026 Leave a message

In sheet metal manufacturing, equipment chassis, new energy shells, precision machining and other industries, thread fixation has been the core of the core assembly process. There are two traditional methods for fixing thin plate: welding nut and direct tapping plate, but both methods have obvious disadvantages: welding is easy to deform, rust, low efficiency; the number of thin plate tapping thread is insufficient, easy to slide, lowbearing capacity. The biggest advantage of rivet nuts is that they do not require welding or tapping and can be mechanically extruded to create high-strength internal threads on thin and aluminum plates. It has become the mainstream of modern sheet metal assembly with its simple and reliable mechanical principle. This paper analyzes its core working principle and forming logic in depth.
Rivet nuts can be designed according to the principle metal plastic deformation and self-locking structure to achieve seamless thread-free wire forming. Unlike regular nuts, which rely on threaded locking, rivet nuts themselves have unique structures: hardened edges for the head, circular anti-slip grooves, straight locking teeth and flat threaded holes. The hardness of the nut body is much higher than that of ordinary plate, which is the basic condition for extruding plate and achieving internal fixation. Soft plates deform under high pressure, while hard nuts maintain structural stability, resulting in rigid overall locking structures.
The whole riveting process can be divided into three stages, no welding heat source is needed, and no tapping is required. The first stage is positioning before opening bell. According to the specification of rivet nut, drilling accuracy does not require high precision tolerances for stamping or drilling on sheet metal. By removing the burr, we can ensure the flatness of the orifice and greatly reduce the difficulty of pretreatment. The second stage is to put pressure on the target. Place the rivet nut in the hole position in front of the board and apply pressure vertically and evenly using a special rivet press and pneumatic press, focusing on the rivet step position of the nut. Step three was plastic locking. As the pressure increases, the stiffer nut presses against the edge of the plate hole, forcing the thin sheet of metal to flow inward and completely fill the anti-slip and locking grooves at the base of the nut, creating an irreversible mechanical bite.
The forming rivet structure realizes dual physical self-locking, which is also the key to its robustness far more than ordinary technology. The first layer is a circumferential self-lock with metal plate embedded in the nut's anti-slip tooth groove, which completely prevents the nut from sliding and rotating, solving the common problem of "following the screw rotation" during assembly; the second layer is an axial anti detachment self-locking. The deformation plate is clamped inside the nut ring groove, forming a hook locking structure. No matter how much axial pulling force is applied, the nut cannot be pulled out directly, and the pulling performance is stable and reliable.
It is this principle that makes the riveting process avoid the defect of traditional technology completely. Welding nuts are held in place by welding, and high temperatures can lead to sheet thermal deformation, paint surfaces damage, solder joints oxidation and rust, and require ancillary processes such as polishing and slag removal. However, direct tapping of thin plate is limited by the thickness of the thin plate, which leads to incomplete thread profiles, easy sliding and tooth breakage under stress, and cannot meet the requirements of disassembly and load bearing. Rivet nut are cold throughout the process, without heat or cutting, damaging neither the the flatness nor coating of the plate. After assembly, the surface is smooth and even, no further repair is needed.
The mechanical advantages of rivet nuts are very prominent in practical working conditions. Under the condition equipment vibration, repeated locking, lifting and bearing of equipment, the stress distribution of the integrated structure formed by riveting is uniform and it is not easy to loosen or fall off. At the same time, the standardized riveting process has high fault tolerance and is suitable for mass production on assembly lines. It fixes nuts in seconds and is far more productive than welding or manual tapping. carbon steel, stainless steel and other materials can also be adapted to different production environments, such as humidity, outdoor, anticorrosion, etc.
Many factories experience rivet loosening, floating and rotating problems, most of which are not defects of product principle but operational problems, such as insufficient pressure, hole diameter, hard plate, riveting direction, etc.. As long as the construction is carried out in strict accordance with standard technology, the forming stability, thread precision and structural strength of rivet nut can fully meet the long-term use requirements of chassis equipment, medical devices, new energy housing and automation equipment.
In short, the core attraction of rivet nuts is that they are completely free from the limitations of welding and tapping by means of cold extrusion plastic deformation and mechanical self-locking. It solves the industry problem of thin plate threading in a simpler, more efficient and more stable way. It is not only a key process to reduce cost and improve efficiency in sheet metal processing, but also an indispensable basic fastener in precision assembly manufacturing.