How Does The External Expansion Screw Work?

Sep 01, 2024 Leave a message

The working principle of the external expansion screw is mainly based on the principle of friction and mechanical locking. When the external expansion screw is installed into the pre-drilled hole, its working process can be divided into the following steps

Drilling: First, in the position that needs to be fixed, use a suitable drill bit to drill a hole in the wall or substrate, the diameter of the hole should be slightly larger than the outer diameter of the expansion tube, to ensure that the expansion tube can be smoothly inserted and there is a certain expansion space.
Insert expansion screws: Place the kit of outer expansion screws (including bolts, expansion tubes, and nuts) into the drilled holes. At this time, the expansion tube has not opened and is in a contracted state.
Tighten the bolt: Use a tool such as a screwdriver or wrench to screw the bolt into the expansion screw kit. With the rotation of the bolt, the taper part of its tail will gradually enter the interior of the expansion tube and produce outward thrust on the expansion tube.
Expansion fixation: Due to the taper design of the bolt, when the bolt continues to screw in, it will push the expansion tube outward until the expansion tube is close to the hole wall. At this point, there is strong friction between the expansion tube and the hole wall, which prevents the bolt from continuing to rotate or pull out. At the same time, the opening of the expansion tube also increases the contact area with the hole wall, and further improves the stability of fixing.
Fastening nut: After the bolt is screwed in and expanded to secure, align the fastener with the bolt, and attach the gasket (if necessary) and nut to the end of the bolt. Then, use a tool such as a wrench to tighten the nut to further secure the fixture and increase the firmness of the connection.
Through the above steps, the external expansion screws can be firmly fixed to the wall or substrate. The key to its working principle is that the expansion tube expands outward under the push of the bolt, and generates strong friction with the hole wall, so as to achieve the fixed effect. This kind of fixing method has the advantages of simple installation, strong bearing capacity and wide application range, so it has been widely used in construction, machinery, electronics and other fields.