Why not the aircraft directly welded, but to choose this seemingly troublesome rivet process?
To reduce weight, the skins are usually very thin. And some aircraft, the fuselage is made of aluminum material, the heat resistance is relatively poor, and the welding process in the welding will produce a lot of heat, which is obviously not suitable for the aluminum fuselage aircraft.
The welding quality largely depends on the skills of the operators. The welding is thin and thick, and the randomness is relatively large, so it is difficult to formulate a unified standard.
And the riveting process used in these rivets, the parameter error is very small, easy for quality control and standardized production.
In fact, the rivets used in the field of aviation manufacturing are mainly convex head and buried head rivets. In the interior of the aircraft, because there is no aerodynamic shape requirements, the main cost is low, easy to process the convex head rivet.
The rivets are mainly used for the smooth part of the appearance of the plane, which can effectively reduce the resistance of the plane. In the processing process, there are strict requirements for the tolerance of the nail cap and the nearby structure. When you touch the surface of the plane, you can hardly feel the presence of rivets.
The application has produced remarkable results, with the resistance of the aircraft able to be reduced by about 3%, according to the data.
The scattered parts, through the rivets, finally turn into a large plane flying in the sky. Rivet in the aircraft manufacturing unknown, but to the great credit.

